EB100 Analogue

Dimensions mm
81 x 81 x 40

The EB100 is an electrical thermostat developed for optimal regulation of under floor heating systems.

The EB100 offers a slightly simpler thermostat, without a timer, but still offers all the main functions. Temperature control is via a simple analogue dial.

The thermostat has three modes of operations. You can choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.

Complete with 3m floor sensor probe.

For general installation information see the Thermosat Installation Guide. For manufacturers instructions EB100 Installation Instructions

TH132 F & AF

Dimensions mm
78.9 x 83 x 20.7

The TH132 F is the same as the AF except that it only has a Floor sensor.

The Flexel TH132 AF is a dual function fully programmable controller fitted with 2 temperature sensors.
One internal sensor controlling room ambient temperature. The second sensor installed in the floor limiting the floor to 28ºC maximum.

Easy to programme and install. Single pole, 4 wire connection for flush mounting onto a standard 45mm deep electrical box or using an optional surface mounting box.
Protected memory, no batteries required. Automatic memory with manual override if required. 4 daily programmes with separate 7 day settings, vocational programme and optional day and night temperature settings.
Optimum start function calculates the most efficient start time for the system to achieve the required temperature at the programmed time.
Proportional control at 15 minute intervals and based on previous performance controls the most efficient time for the heating system to operate during each heating period.

Complete with 3m floor sensor probe.

For installation information see the Thermosat Installation Guide. For manufacturers instructions TH132 Installation Instructions